Page 2 of 2
ESIP Notes
- Auto-Switch to gasoline capability when LPG/CNG storage “OUT” (bi-fuel only) with operator notification buzzer.
- User-customizable LPG or CNG fuel map generation.
- Utilization of OEM PCM fuel trim strategies.
- Transparent operation
- Client specific fuel level indication.
- Installer must fabricate all chassis mounting hardware (NO BRACKETS ARE INCLUDED)
- All factory engine components (including emission controls) remain as per OEM.
- Fuel tank and high pressure lines are NOT included in this package.
- Factory technical support was NOT included, but is available at current hourly rates
- ESIP parts carried a 12 month conditional warranty.
- 100% of the components that made up each ESIP were “SERVICEABLE”. (INCLUDING THE INJECTORS).
- “FACTORY MATCHED COMPONENTS BOX PACKAGING” concept insured that the system performed to the highest standards
Package Components
- Regulator with lock-off.
- Generic electronic controller.
- Wiring harness.
- Injector rail(s).
- Temperature sensor.
- Intake manifold nozzles.
- Positive pressure and vacuum sensor.
- Fuel selector switch with level Indicator and buzzer.
- Tank level sender and harness.
- WYE coolant hose adapters.
- WYE barb vacuum connector
- Windows platform
- Most current Installation manual, schematics, and software available online.
Optional Components
- Vapour phase filter (recommended if your fuel contains heavy-end residuals)
- Hose and clamp package (recommended to connect the under hood components)
- Interface cable (you only need this for your first conversion)